The space awaiting a new settling tank 16th Aug

The loco had to be moved by pinch bar so that the plant machinery could get close enough to get the new tanks in the loco

Ta da!!! as if by magic a new settling tank in place. That took some two hours with much swearing/cursing/shounting to get those tanks in place!!!

One fitted Settlig tank

The Side A settling tank fitted and exhauster also refitted

A general view on 3rd September

Another view taken after the floor was repainted and the tanks were top coated

A view of the Side A tank after painting

A week later 10th Sept the floor panels were replaced

10th Sept both radiator frames were dug out and prepared for refitting into the loco

A view of D5401 10th September

One radiator refitted 10th Sept

The otherside before the frame was installed

The completely re-assembled Exhauster Side A

Taken while standing on the roof holding the second radiator frame

Side B exhauster after re-assembly Oct 2008

After the lifting was completed and before I locked up and went home, both frames are back in and all major components are installed

The finished product, just the door to clean and paint

Side B roof hatch, all 28 bolts were drilled and tapped with new bolts

Side B bellow, one of the finished articles

17th Oct 2008 Martin H is finishing the final bellow

D5401 & Peckett 2104 at Pitsford 17th Oct 2008

Once again another picture of the finished work

Another example of the high standard of workmanship